Flex AWD V6-3.5L (2009)
11. NOTE: Console removed for clarity.
Disconnect the selector lever cable retainer from the floor and route the cable out from under the heater housing.
12. Remove the selector lever cable grommet nuts at the bulkhead.
13. Disconnect the Mass Air Flow (MAF) sensor connector.
14. Disconnect the engine breather from the Air Cleaner (ACL) assembly.
15. Remove the 2 ACL assembly bolts.
16. Loosen the ACL outlet pipe clamp at the Throttle Body (TB) and remove the ACL and ACL outlet pipe assembly.
