Flex AWD V6-3.5L (2009)
17. Disconnect the selector lever cable retainer from the brake tube bracket.
18. Disconnect the selector lever cable end from the manual control lever.
19. Depress the 2 tabs, remove the selector lever cable from the bracket and remove the selector lever cable.
Installation
1. Position the selector lever cable in the vehicle and install the cable in the bracket.
-
Be sure the tabs are locked in place.
2. Connect the selector lever cable retainer on the brake tube bracket.
3. Install the selector lever cable, position the selector lever cable grommet in place and install the 2 nuts.