Flex FWD V6-3.5L (2010)
3. If equipped, remove the manual lumbar handle.
1. Push the cushion cover and foam pad back and locate the manual lumbar handle clip under the cushion side shield.
2. Remove the clip and slide the manual lumbar handle off the shaft.
4. NOTE: For retainer clarity, inside of cushion side shield shown.
Remove the cushion side shield.
1. Remove the screw at the back of the cushion side shield.
2. Remove the screw at the side of the cushion side shield.
3. Remove the screw at the front of the cushion side shield.
4. Pull out on the cushion side shield to release the clips and separate.
-
If equipped, disconnect the seat control switch.
Seats with a DVD player
5. Detach the cushion cover inboard J-clips and pin-type retainer.