Flex FWD V6-3.5L (2010)
Seat Cover: Service and Repair
Rear Seat
Seat Backrest Cover - With Fold Flat
Seat Backrest Cover - With Fold Flat
Removal
WARNING: Always carry or place a live air bag module with the air bag and deployment door/trim cover/tear seam pointed away from the
body. Do not set a live air bag module down with the deployment door/trim cover/tear seam face down. Failure to follow these instructions may
result in serious personal injury in the event of an accidental deployment.
WARNING: Never probe the electrical connectors on air bag, Safety Canopy(R) or side air curtain modules. Failure to follow this instruction
may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
WARNING: Front seat backrest trim covers installed on seats equipped with seat side air bags cannot be repaired. A new trim cover must be
installed. Cleaning is permissible. Failure to follow these instructions may result in the seat side air bag module deploying incorrectly and
increase the risk of serious personal injury or death in a crash.
All seats
1. Remove the front passenger seat. For additional information, refer to Seat - Front See: Service and Repair/Front Seat/Seat - Front.
2. If not equipped with a DVD player, remove the 2 head restraint guides sleeves. For additional information, refer to Head Restraint Guide Sleeve
See: Head Rest/Service and Repair/Head Restraint Guide Sleeve.
3. Remove the inboard recliner lower cover.
1. Remove the screw at the back of the inboard recliner lower cover.
2. Remove the screw at the side of the inboard recliner lower cover.
3. Pull out at the rear of the inboard recliner lower cover to release the retainers and remove.
4. Remove the inboard recliner upper cover.
1. Pull at the front and release the clip.
2. Rotate the inboard recliner upper cover clockwise and remove.
5. Separate the fold-flat cable retainer, cover and DVD player wire harness pin-type retainers (if equipped) from the inboard recliner.