Flex FWD V6-3.5L (2010)
1. Remove the third row seat. For additional information, refer to Seat - Third Row See: Service and Repair/Rear Seat/Seat - Third Row.
2. Remove the third row backrest. For additional information, refer to Seat Backrest - Third Row See: Seat Back/Service and Repair/Removal and
Replacement/Rear Seat/Seat Backrest - Third Row.
3. Pry to release the clips and remove the backrest latch outer cover.
-
Pull the release strap through the recliner outer cover.
4. Remove the 2 screws and pull the pivot release handle out of the pocket.
5. Separate the pivot release cable and casing and remove the pivot release handle.
6. Remove the 2 screws on each side at the bottom of the load floor panel.
7. Pull out to release the retainers and remove the load floor panel.
8. Remove the screw, release the tab and remove the floor latch cover.
9. Release the cushion trim cover retainers from the cushion frame, and remove the cushion trim cover and cushion foam pad.