Flex FWD V6-3.5L (2010)
15. Remove the 3 pin-type retainers, 7 bolts and the front valance.
16. Disconnect the power steering cooler tube located at the left front subframe and drain the power steering fluid into a suitable container.
17. Remove the nut and disconnect the A/C tube.
-
Discard the O-ring seal and gasket seal.
18. Remove the nut and the A/C tube.
-
Discard the O-ring seal and gasket seal.
19. Remove the degas bottle. For additional information, refer to Cooling System &/or Engine Block Heater.
20. Disconnect the vacuum hose and the Evaporative Emission (EVAP) tube from the upper intake manifold.
21. Detach the EVAP tube pin-type retainer from the upper intake manifold.