Flex FWD V6-3.5L (2010)
22. Remove the EVAP canister purge valve. For additional information, refer to Evaporative Emissions System.
23. Disconnect the PCM and engine harness electrical connectors.
-
Detach the wiring harness retainer.
24. Disconnect the 2 PCM electrical connectors.
25. Remove the engine wiring harness retainer from the bulkhead.
1. Push the wiring harness retainer tab in.
2. Slide the wiring harness up and out of the bulkhead.
26. Disconnect the upper radiator hose, lower radiator hose and 2 heater hoses from the thermostat housing.
27. Disconnect the transaxle control cable from the control lever.