Flex FWD V6-3.5L (2010)
28. Disconnect the transaxle control cable from the shift cable bracket and detach the wiring harness pin-type retainer.
29. If equipped, detach the engine block heater harness from the radiator support.
30. Disconnect the A/C pressure switch and remove the nut and disconnect the upper A/C tube from the condenser.
-
Discard the O-ring seal.
31. Disconnect the fuel supply tube from the fuel rail. For additional information, refer to Fuel Delivery and Air Induction.
32. Detach the engine wiring harness retainer.
33. Detach the wire harness retainer from the RH valve cover stud bolt.