Flex FWD V6-3.5L (2010)
34. Remove the bolt and the ground cable from the engine.
35. Disconnect the hose from the power steering reservoir.
36. NOTE: Use a steering wheel holding device (such as Hunter(R) 28-75-1 or equivalent).
Using a suitable holding device, hold the steering wheel in the straight-ahead position.
37. NOTE: Apply the brake to keep the halfshafts from rotating.
NOTE: RH shown, LH similar.
Remove the RH and LH halfshaft nuts.
-
Do not discard at this time.
38. NOTE: RH shown, LH similar.
Using the Front Wheel Hub Remover, separate the RH and LH halfshaft from the wheel hubs.