Flex FWD V6-3.5L (2010)
27. Install the RH cylinder block drain plug or, if equipped, the block heater.
-
Tighten to 40 Nm (30 lb-ft).
Front Wheel Drive (FWD) vehicles
28. Using a new gasket, install the RH catalytic converter and 4 new nuts.
-
Tighten to 40 Nm (30 lb-ft).
All vehicles
29. Using a new gasket, install the LH catalytic converter and 4 new nuts (3 shown).
-
Tighten to 40 Nm (30 lb-ft).
30. Install the accessory drive belt tensioner and the 3 bolts.
-
Tighten to 11 Nm (97 lb-in).