Flex FWD V6-3.5L (2010)
31. Install the power steering pump and the 3 bolts.
-
Tighten to 25 Nm (18 lb-ft).
32. Install the Power Steering Pressure (PSP) tube bracket bolt.
-
Tighten to 10 Nm (89 lb-in).
33. Install the PSP bracket and nut to the RH valve cover stud bolt.
-
Tighten to 7 Nm (62 lb-in).
34. Attach all of the wiring harness retainers to the LH valve cover and stud bolts.
35. Connect the 3 LH coil-on-plug electrical connectors.
36. Connect the LH camshaft VCT solenoid electrical connector.
