Flex FWD V6-3.5L (2010)
-
Is the voltage greater than 10 volts?
Yes
For a front lamp or license plate lamp, INSTALL a new bulb holder. TEST the system for normal operation.
For a front side marker lamp, INSTALL a new headlamp assembly. REFER to Headlamp Assembly See: Headlamp/Service and Repair. TEST the
system for normal operation.
For a rear lamp, REPAIR or INSTALL a new rear lamp jumper harness. TEST the system for normal operation.
No
REPAIR the ground circuit in question for an open. TEST the system for normal operation.
-------------------------------------------------
P6 CHECK FOR CORRECT SJB OPERATION
-
Disconnect all the SJB connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins