Flex FWD V6-3.5L (2010)
![background image](/ford/flex_fwd/v6-3.5l/Page-1368001.png)
Transmission Mount: Service and Repair
Transaxle Support Insulator - Anti-Roll
Transaxle Support Insulator - Anti-Roll, 3.5L
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the 2 through bolts and remove the roll restrictor.
3. Remove the 2 Y-pipe nuts, disconnect the exhaust hanger and discard the exhaust seal.
-
Discard the gasket and nuts.