Workshop Manuals Factory service & repair Ford
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Ford Focus L4-2.0L (2009)03 · Maintenance
03 · Maintenance

Vehicle Lifting: Description and Operation

Make
Ford
Model
Focus
Engine
L4-2.0L
Year
2009
Section
Vehicle Lifting › Description and Operation
MaintenanceDescription and Operation
background image

Vehicle Lifting: Description and Operation

Jacking and Lifting

WARNING: Never get underneath a vehicle that is supported only by a jack. The jack could unintentionally lower. Always support vehicle
with floor stands. Failure to follow these instructions may result in serious personal injury.

WARNING: Only raise the vehicle when positioned on a hard, level surface. Attempting to raise the vehicle on an uneven or soft surface may
result in vehicle slipping or falling from the jack or jackstand. Failure to follow this instruction may result in serious personal injury.

WARNING: Position the hoist lift arms as shown in the illustration. Incorrect positioning could result in vehicle slipping or falling from the
hoist. Failure to follow this instruction may result in serious personal injury.

WARNING: When jacking or lifting the vehicle, block all wheels remaining on the ground. Set the parking brake if the rear wheels will remain
on the ground. These actions help prevent unintended vehicle movement. Failure to follow these instructions may result in serious personal
injury.

NOTICE: It is not recommended that the vehicle is jacked or lifted on the rear suspension crossmember. If the vehicle must be lifted on the
crossmember, make sure that the jack or lift is positioned centrally. Failure to follow these instructions will result in deformation of the closing
plate which will weaken the crossmember.

NOTICE: Damage to the suspension, exhaust or steering linkage components may occur if care is not exercised when positioning the hoist
adapters prior to lifting the vehicle.

Jacking and Lifting Locations

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2009 Ford Focus 2.0L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.