Focus L4-2.0L DOHC VIN 3 (2002)
5. Remove the rear safety belt trim panel.
6. From inside the vehicle, using a suitable direct glazing cutter, cut the PU adhesive to the given maximum depths
1. 20 mm.
2. 60 mm.
3. 75 mm.
4. 90 mm.
WARNING: WEAR GLOVES AND EYE PROTECTION WHEN WORKING WITH THE GLASS CUTTING TOOL AS THE
CUTTING OPERATION MAY PRODUCE SPLINTERS. WHEN USING THE CUTTER WEAR EAR PROTECTORS. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CAUTION: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
NOTE: Some resistance may be encountered when cutting through the glass locating pegs in the lower corners of the glass.
7. With the aid of another technician, use glazing suction cups to remove the rear quarter window glass.
INSTALLATION
1. Carefully remove the remaining part of the glass locating pegs from the rear quarter window glass flange.
