Focus L4-2.0L DOHC VIN 5 (2003)
Failure to follow this instruction will result in the switch plungers binding inside the switch. Make sure the switches are correctly installed.
NOTE: The speed control deactivation switch (if equipped) and the stop lamp switch are automatically adjusted during installation. A slight
ratcheting noise and feel during installation of the speed control deactivation switch (if equipped) and the stop lamp switch is normal.
Install the pedal position switches.
1
Stop lamp switch (colored grey).
2
Speed control deactivation switch (colored green) (if equipped).
11. NOTE: The colors of the electrical connectors and switches are identical.
Connect the electrical connectors to the pedal switches.
1
Speed control deactivation switch (if equipped).
2
Stop lamp switch.
12. Connect the Data Link Connector (DLC) and the footwell lamp (if equipped) electrical connectors.
13. Install the instrument panel lower panel.
1
Secure the fastener.
2
Install the screws.