Focus L4-2.0L DOHC VIN 5 (2003)
Rotate the crankshaft to TDC on cylinder No. 1.
3. Remove the blanking plug, install the special tool.
4. CAUTION: Do not kink the timing belt (do not bend the timing belt less than a diameter of 35 mm).
CAUTION: Do not rotate the crankshaft, check that it is still resting against the timing pin.
NOTE: The lug of the belt tensioner must not be hooked into the sheet metal cover during timing belt installation.
Install a new timing belt.
^
Starting from the crankshaft timing belt pulley and working counterclockwise install the timing belt, keeping it under tension.
5. CAUTION: Incorrect timing belt tension will result in incorrect valve timing.
