Focus L4-2.0L DOHC VIN 5 (2003)
Pretension the timing belt.
1
Rotate the tensioner locating tab counterclockwise and insert the locating tab into the slot in the rear timing cover.
2
Position the hexagonal key slot in the tensioner adjusting washer to the 4 o'clock position.
3
Tighten the attaching bolt enough to seat the tensioner firmly against the rear timing cover, but still allow the tensioner adjusting washer to be
rotated using a 6 mm hexagonal key.
6. CAUTION: Tension the timing belt, working counterclockwise.
Using the hexagonal key, rotate the adjusting washer counterclockwise until the notch in the pointer is centered over the index line on the locating
tab (the pointer will move clockwise during adjustment).
7. Tighten the bolt, while holding the adjusting washer in position.
8. NOTE: Use an open ended wrench to prevent the camshaft from rotating.
Tighten the camshaft pulley retaining bolts.