Focus L4-2.3L VIN Z (2003)
Using the special tools to hold the crankshaft pulley in place, tighten the pulley bolt in two stages:
^
Stage 1: Tighten to 100 Nm (74 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees.
25. Remove the special tools.
26. Remove the M6 bolt.
27. Remove the special tool.
28. Remove the special tool from the camshafts.
29. NOTE: Only turn the engine in the normal direction of rotation.
Turn the engine two complete revolutions.