Focus L4-2.3L VIN Z (2003)
30. Install the special tool.
31. CAUTION: Only hand-tighten the bolt or damage to the front cover can occur.
NOTE: If it is not possible to install the bolt, correct the engine timing.
Using the 6 mm (0.23 in.) x 18 mm (0.7 in.) bolt, check the position of the crankshaft pulley.
32. NOTE: If it is not possible to install the special tool, correct the engine timing.
Using the special tool, check the position of the camshafts.
33. Remove the special tool.