ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Thermostat - 1.8L Diesel > < Thermostat - 1.6L Zetec-SE (Sigma)-1.4L

Focus 1999 (08.1998-12.2004)

Engine Cooling - Thermostat—1.6L Zetec-E (Zetec)/1.8L Zetec-E (Zetec)/2.0L Zetec-E (Zetec) Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

  1. Drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

  1. Disconnect the coolant hoses.

  1. Remove the thermostat cover bolts.

  1. Remove the thermostat.

  1. Remove and discard the rubber seal.

Installation
  1. NOTE:
    NOTE:Install a new rubber seal.
    To install, reverse the removal procedure.
  1. Fill the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

Thermostat - 1.8L Diesel > < Thermostat - 1.6L Zetec-SE (Sigma)-1.4L