ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position (CKP) Sensor - 1.8L Diesel > < Crankshaft Position (CKP) Sensor - 1.6L Zetec-SE (Sigma)-1.4L

Focus 1999 (08.1998-12.2004)

Electronic Engine Controls - Crankshaft Position (CKP) Sensor—1.6L Zetec-E (Zetec)/1.8L Zetec-E (Zetec)/2.0L Zetec-E (Zetec) Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Disconnect the crankshaft position (CKP) sensor electrical connector.

  1. Remove the CKP sensor.

Installation
  1. To install, reverse the removal procedure.

Crankshaft Position (CKP) Sensor - 1.8L Diesel > < Crankshaft Position (CKP) Sensor - 1.6L Zetec-SE (Sigma)-1.4L