Removal and Installation Removal | -
Remove the gearshift lever cover. - Unclip the cover.
- Twist off the gearshift lever knob. Take out the damping sleeves and compression spring.
- Separate the connectors (number and configuration depends on equipment).
| | -
Remove the center console. | | -
Detach the shift and selector cables from the gearshift lever. - Remove the cables by twisting the abutment collar counter-clockwise.
| | -
Remove the shift mechanism. | Installation | -
Refit the components in the reverse order. | | -
Adjust the gearshift mechanism. | | |