ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Gearshift Cables > < External Controls

Focus 1999 (08.1998-12.2004)

Manual Transmission/Transaxle External Controls - Vehicles With: MT285 - Gearshift Linkage Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

  1. Remove the gearshift lever boot and knob.
  1. Remove the floor console. For additional information, refer to Section  501-12 Instrument Panel and Console.

  1. Remove the gearshift linkage retaining nuts.

  1. Detach the gearshift cables from the gearshift linkage.
    • Turn the abutment sleeves clockwise and detach the cables from the bracket.

  1. Detach the gearshift cable from the gearshift lever.

  1. Detach the selector cable from the selector lever.
  1. Remove the gearshift linkage.

Installation

  1. To install, reverse the removal procedure.
  1. Adjust the gearshift cables. For additional information, refer to Section  308-00 Manual Transmission/Transaxle and Clutch - General Information.

Gearshift Cables > < External Controls