ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
414-02 Generator and Regulator|Specifications > < Generator - 1.6L Zetec-E (Zetec)-1.8L-2.0L-2.0L Duratec-RS (Zetec)

Focus 1999 (08.1998-12.2004)

Generator and Regulator - Generator—1.8L Diesel Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

All Vehicles
  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Remove the accessory drive belt. For additional information, refer to Section  303-05 Accessory Drive.

  1. Remove the engine undershield.
  1. Remove the generator electrical connector cover.

  1. Disconnect the generator electrical connectors.
Vehicles with air conditioning
  1. Detach the air conditioning compressor and secure to one side.
All Vehicles
  1. Remove the pulley bracket bolts.

  1. Remove the generator coupling.
    • Loosen the three bolts.

  1. Remove the generator.

Installation

All Vehicles
  1. To install, reverse the removal procedure.

Vehicles with air conditioning

  1. Initialize the door window motors. For additional information, refer to Section  501-11 Glass, Frames and Mechanisms.

414-02 Generator and Regulator|Specifications > < Generator - 1.6L Zetec-E (Zetec)-1.8L-2.0L-2.0L Duratec-RS (Zetec)