Removal and Installation Name Specification Back panel Removal | -
General notes - Move the floor covering and wiring away from the working area.
| | -
Back panel - Detach the spot welds and bend up the weld flanges.
| Installation | -
Back panel (on both sides) - Bend the weld flange inwards.
| | -
Back panel - Push the left-hand side of the back panel under the weld flange.
- Tilt the top right-hand side of the back panel forwards and from below push it under the bent up weld flange.
| | -
Back panel - Bend back the weld flanges.
- Puddle weld.
| | -
Back panel (on both sides) - Bend the panel flange back.
- Puddle weld.
| | |