ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Piston Diameter > < Piston Inspection

Focus 2004.75 (07.2004-)

Engine System - General Information - Piston Ring End Gap Focus 2004.75 (07/2004-)
General Procedures
  1. CAUTION:
    CAUTION:Do not mix up the piston rings. Install the piston rings in the same position and location.
    Take the piston ring and use a piston without rings to push the piston ring about 30 mm into the cylinder bore.

  1. Using the Feeler Gauge, measure the piston ring gap.

Piston Diameter > < Piston Inspection