ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Engine Accessories > < Engine - Vehicles With: Manual Transaxle

Focus 2004.75 (07.2004-)

Engine - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) - Engine—Vehicles With: Automatic Transmission Focus 2004.75 (07/2004-)

Removal

Special Tool(s)
303-122
Lifting Bracket, Engine
General Equipment
Hose clamp remover/installer
Hydraulic jib crane
Mounting table set
Securing Strap
Tire lever
Wooden Block
  1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Fuel System Pressure Release - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V Ti-VCT (Sigma)/1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) (310-00 Fuel System - General Information, General Procedures).
  1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
  1. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. CAUTION:
    CAUTION:Make sure that the exhaust flexible pipe is not forcibly bent.
    General Equipment: Tire lever

  1. Refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation).
    Refer to: Front Halfshaft RH (205-04 Front Drive Halfshafts, Removal and Installation).
  1. Refer to: Air Conditioning (A/C) Compressor Belt - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) (303-05A Accessory Drive, Removal and Installation).
  1. Refer to: Radiator (303-03A Engine Cooling - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma), Removal and Installation).

  1. Refer to: Battery Tray - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma)/1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) (414-01 Battery, Mounting and Cables, Removal and Installation).

  1. General Equipment: Hose clamp remover/installer

  1. Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures).

  1. General Equipment: Hose clamp remover/installer

  1. CAUTION:
    CAUTION:The gearshift cables must not be kinked or twisted.

  1. WARNING:
    WARNING:Make sure that any escaping fluid is collected.

  1. Secure the engine and transmission to the assembly table using suitable tensioning straps and wooden blocks.
    General Equipment: Mounting table set
    General Equipment: Wooden Block
    General Equipment: Securing Strap

  1. CAUTION:
    CAUTION:Make sure components do not get trapped.
    Raise the vehicle.

  1. Install the Special Tool(s): 303-122
    General Equipment: Hydraulic jib crane

  1. Refer to: Starter Motor - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) (303-06A Starting System, Removal and Installation).

  1. CAUTION:
    CAUTION:Make sure the torque converter remains in the transaxle.

Engine Accessories > < Engine - Vehicles With: Manual Transaxle