Ford Workshop Service and Repair Manuals

Remover, Crankshaft Seal

303-293 (21-143)

Installer, Crankshaft Seal

303-395 (21-171)

1. Remove the timing belt.
   For additional information, refer to: Timing Belt - Vehicles Built Up To: 04/2005 (303-01B Engine - 1.6L Duratec-16V Ti-VCT (Sigma), In-vehicle Repair) /
   Timing Belt - Vehicles Built From: 04/2005 (303-01B Engine - 1.6L Duratec-16V Ti-VCT (Sigma), In-vehicle Repair).
   

2. Remove the crankshaft timing pulley.

3. Using the special tool, remove the crankshaft front seal.
   • Discard the seal.

1. Using the special tool, install the crankshaft front seal.

2. Install the crankshaft timing pulley.

3. Install the timing belt.
   For additional information, refer to: Timing Belt - Vehicles Built Up To: 04/2005 (303-01B Engine - 1.6L Duratec-16V Ti-VCT (Sigma), In-vehicle Repair) /
   Timing Belt - Vehicles Built From: 04/2005 (303-01B Engine - 1.6L Duratec-16V Ti-VCT (Sigma), In-vehicle Repair).