ford Workshop Repair Guides

Ford Focus Workshop Service and Auto Repair Manuals

ABOUT US
Engine Accessories > < Oil Pump

25L Duratec-ST Engine Removal for Focus 200475 (072004-)

Engine - 2.5L Duratec-ST (VI5) - Engine Focus 2004.75 (07/2004-)

Removal

  1. Release the fuel pressure.
    Refer to: Fuel System Pressure Release - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V Ti-VCT (Sigma)/1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) (310-00 Fuel System - General Information, General Procedures).
  1. Remove the battery tray.
    Refer to: Battery Tray - 2.5L Duratec-ST (VI5) (414-01 Battery, Mounting and Cables, Removal and Installation).
  1. Remove the air cleaner.
    Refer to: Air Cleaner - Vehicles With: PCM Security Shield (303-12B Intake Air Distribution and Filtering - 2.5L Duratec-ST (VI5), Removal and Installation).
    Refer to: Air Cleaner - Vehicles Without: PCM Security Shield (303-12B Intake Air Distribution and Filtering - 2.5L Duratec-ST (VI5), Removal and Installation).

  1. Disconnect the fuel lines.
    Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures).

  1. Drain the coolant.
    Refer to: Cooling System Draining, Filling and Bleeding (303-03D Engine Cooling - 2.5L Duratec-RS (VI5)/2.5L Duratec-ST (VI5), General Procedures).

  1. Remove the driveshafts.
    Refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation).
    Refer to: Halfshaft RH (205-04 Front Drive Halfshafts, Removal and Installation).
  1. Remove the air conditioning (A/C) compressor belt.
    Refer to: Air Conditioning (A/C) Compressor Belt (303-05B Accessory Drive - 2.5L Duratec-RS (VI5)/2.5L Duratec-ST (VI5), Removal and Installation).
  1. Remove the accessory drive belt.
    Refer to: Accessory Drive Belt (303-05B Accessory Drive - 2.5L Duratec-RS (VI5)/2.5L Duratec-ST (VI5), Removal and Installation).

  1. NOTE:
    NOTE:Note the position of the spring washers to aid installation.

  1. CAUTION:
    CAUTION:Make sure that the exhaust flexible pipe is not twisted.

  1. Position the A/C compressor to one side.

  1. CAUTION:
    CAUTION:Gearshift cables must not be kinked or bent.

Engine Accessories > < Oil Pump