In-vehicle Repair Special Tool(s) | Installer, Timing Cover Seal 303-255 | | Remover, Crankshaft Seal 303-293 | | Installer, Crankshaft Seal 303-395 | | -
Remove the timing belt. For additional information, refer to Timing Belt - in this section. | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 2 - Crankshaft pulley Woodruff key 3. To install, reverse the removal procedure. Removal Details Item 3 : Crankshaft front seal | -
Using the special tool, remove the crankshaft front seal. | Installation Details Item 3 : Crankshaft front seal | -
NOTE:New crankshaft front seals are supplied with an alignment sleeve which will be pushed out during installation. Using the special tool and the old crankshaft pulley bolt, install the crankshaft front seal. - Remove and discard the alignment sleeve.
| |