ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Crankshaft Rear Seal > < In-vehicle Repair|Oil Pan
Engine - 2.0L Duratorq-TDCi (DW) Diesel - Oil Pump Focus 2004.75 (07/2004-)
In-vehicle Repair

Name
Specification
Metal Surface Cleaner
 
Silicone Sealant
WSE-M4G323-A4 
  1. Remove the oil pan.
    For additional information, refer to: Oil Pan (303-01G Engine - 2.0L Duratorq-TDCi (DW) Diesel, In-vehicle Repair).
  1. Remove the crankshaft front seal.
    For additional information, refer to: Crankshaft Front Seal (303-01G Engine - 2.0L Duratorq-TDCi (DW) Diesel, In-vehicle Repair).

3. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Crankshaft front seal retainer bolts - long
2
-
Crankshaft front seal retainer bolts - short

 
Item
Part Number
Description
4
-
Oil pump retaining bolts
5
-
Oil pump guiding bolt
7
-
Oil pump drive sprocket Woodruff key
8
-
Oil pump drive sprocket O-ring seal

4. To install, reverse the removal procedure.

Removal Details

Item 3 : Crankshaft front seal retainer

  1. Using a suitable spatula, remove the crankshaft front seal retainer.
    • Slide the spatula around the profile of the crankshaft front seal retainer.

Item 6 : Oil pump

  1. Remove the oil level indicator tube retaining bolt.

  1. Remove the oil pump together with the oil pump chain and the oil pump drive sprocket.
  1. Detach the oil pump chain and the oil pump drive sprocket from the oil pump.

Installation Details

Item 6 : Oil pump

  1. Attach the oil pump chain and the oil pump drive sprocket to the oil pump.

  1. Install the oil pump together with the oil pump chain and the oil pump drive sprocket.

  1. Install the oil level indicator tube retaining bolt.

Item 3 : Crankshaft front seal retainer

  1. Clean the crankshaft front seal retainer mating face and the cylinder block mating face with metal surface cleaner.

  1. CAUTION:
    CAUTION:Install the crankshaft front seal retainer within four minutes of applying the sealer.
    Apply a 3 mm bead of sealant to the crankshaft front seal retainer mating face.

Crankshaft Rear Seal > < In-vehicle Repair|Oil Pan