ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Accessory Drive Belt Tensioner - 1.6L Duratorq-TDCi (DV) Diesel, Vehicles Without: Air Conditioning > < Accessory Drive Belt Tensioner - 1.8L Duratec-HE (MI4)-2.0L Duratec-HE (MI4)

Focus 2004.75 (07.2004-)

Accessory Drive - Accessory Drive Belt Tensioner—1.6L Duratorq-TDCi (DV) Diesel, Vehicles With: Air Conditioning Focus 2004.75 (07/2004-)
Removal and Installation

Special Tool(s)

Release Tool. Belt Tensioner

303-676 (21-235)
General Equipment
Dowel with a diameter of 5mm
  1. Remove the accessory drive belt,
    For additional information, refer to Accessory Drive Belt - 1.6L Diesel in this section.
  1. Lower the vehicle.

3. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Manifold absolute pressure (MAP) sensor electrical connector
2
-
Throttle body electrical connector
3
-
Throttle body intake pipe
4
-
Throttle body support bracket retaining bolts
5
-
Throttle body and intake pipe

 
Item
Part Number
Description
6
-
Accessory drive belt tensioner
See Removal Detail
See Installation Detail

4. To install, reverse the removal procedure.

Removal Details

Item 6 : Accessory drive belt tensioner

  1. Using the special tool, detention the accessory drive belt tensioner. Remove the dowel with a diameter of 5mm and remove the special tool.

Installation Details

Item 6 : Accessory drive belt tensioner
  1. Using the special tool reset the accessory drive belt tensioner to the detention position.
    1. Rotate the tensioner clockwise.
    1. Install the dowel with a diameter of 5mm into the hole of the accessory drive belt tensioner bracket.

Accessory Drive Belt Tensioner - 1.6L Duratorq-TDCi (DV) Diesel, Vehicles Without: Air Conditioning > < Accessory Drive Belt Tensioner - 1.8L Duratec-HE (MI4)-2.0L Duratec-HE (MI4)