Torque Specifications - vehicles with 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma)/1.6L Duratec-16V Ti-VCT (Sigma) engine
| Description | Nm | lb-ft | lb-in |
| Crankshaft position (CKP) sensor retaining bolt | 7 | - | 62 |
| Heated oxygen (HO2S) sensor | 42 | 31 | - |
| Camshaft position (CMP) sensor retaining bolt | 7 | - | 89 |
| Engine coolant temperature (ECT) sensor | 12 | - | 53 |
| Variable camshaft timing (VCT) oil control solenoid retaining bolt (vehicles with 1.6L Duratec-16V Ti-VCT (Sigma) engine) | 10 | - | 89 |
Torque Specifications - vehicles with 1.6L Duratorq-TDCi (DV) Diesel engine
| Description | Nm | lb-ft | lb-in |
| Engine timing belt upper cover retaining bolts | 4 | - | 35 |
| Engine timing belt lower cover retaining bolts | 6 | - | 53 |
| Crankshaft pulley retaining bolt | a | - | - |
| Crankshaft position (CKP) sensor retaining bolt | 8 | - | 71 |
| Camshaft position (CMP) sensor retaining bolt | 5 | - | 44 |
a)
For additional information, refer to: Crankshaft Position (CKP) Sensor - 1.6L Duratorq-TDCi (DV) Diesel (303-14A Electronic Engine Controls, Removal and Installation).
Torque Specifications - vehicles with 1.6L (Z6) engine
| Description | Nm | lb-ft | lb-in |
| Crankshaft position (CKP) sensor retaining bolt | 10 | - | 89 |
| Camshaft position (CMP) sensor retaining bolt | 10 | - | 89 |
| Engine coolant temperature (ECT) sensor | 20 | 15 | - |
| Knock Sensor (KS) | 26 | 19 | - |
| Variable camshaft timing (VCT) oil control solenoid retaining bolt | 10 | - | 89 |
| Heated oxygen (HO2S) sensor | 40 | 30 | - |
| Intake manifold tuning (IMT) valve retaining bolts | 5 | - | 44 |
| Throttle position (TP) sensor retaining bolts | 2 | - | 18 |
| Idle air control (IAC) valve | 5 | - | 44 |
| Engine oil pressure (EOP) sensor | 15 | 11 | - |
| Intake manifold runner control (IMRC) actuator retaining bolts | 9 | - | 80 |
| Catalyst monitor sensor | 40 | 30 | - |
Torque Specifications - vehicles with 1.8L Duratorq-TDCi (Kent) Diesel engine
| Description | Nm | lb-ft | lb-in |
| Turbocharger oil supply pipe retaining nut | 18 | 13 | - |
| Knock Sensor (KS) heat shield retaining stud | 23 | 17 | - |
| KS retaining bolt | 20 | 15 | - |
| Crankshaft position (CKP) sensor retaining bolt | 6 | - | 53 |
| Camshaft position (CMP) sensor retaining bolt | 6 | - | 53 |
| Fuel filter crash protection top shield retaining bolts | 9 | - | 80 |
| Cylinder head temperature (CHT) sensor | 20 | 15 | - |
Torque Specifications - vehicles with 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) engine
| Description | Nm | lb-ft | lb-in |
| Front Knock Sensor (KS) retaining bolt | 20 | 15 | - |
| Rear KS retaining bolt | 20 | 15 | - |
| Camshaft position (CMP) sensor retaining bolt | 6 | - | 53 |
| ECT sensor | 12 | 9 | - |
| Crankshaft position (CKP) sensor retaining bolt | 6 | - | 53 |
Torque Specifications - vehicles with 2.0L Duratorq-TDCi (DW) Diesel engine
| Description | Nm | lb-ft | lb-in |
| Engine timing belt cover retaining bolts | 7 | - | 62 |
| Crankshaft pulley retaining bolt | a | - | - |
| Crankshaft position (CKP) sensor retaining bolt | 8 | - | 71 |
| Camshaft position (CMP) sensor retaining bolt | 2 | - | 18 |
a)
For additional information, refer to: Crankshaft Position (CKP) Sensor - 2.0L Duratorq-TDCi (DW) Diesel (303-14 Electronic Engine Controls, Removal and Installation).
