Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Gearshift Cable Adjustment - Vehicles With: 5-Speed Manual Transmission (MTX-75) >
< Clutch System Bleeding
Focus 2004.75 (07.2004-)
Mechanical Repairs
3 Powertrain
308 Manual Transmission-Transaxle, Clutch and Transfer Case / 308-00 Manual Transmission-Transaxle and Clutch - General Information
Diagnosis and Testing
General Procedures
Gearshift Cable Adjustment - Vehicles With: 5-Speed Manual Transmission (iB5)
Manual Transmission/Transaxle and Clutch - General Information - Gearshift Cable Adjustment—Vehicles With: 5-Speed Manual Transmission (iB5)
Focus 2004.75 (07/2004-)
General Procedures
General Equipment
3 mm drill
Detach the gearshift lever gaiter and trim panel from the centre console and pull upwards.
CAUTION:
Wrap the flutes of the drill bit with a suitable tape.
Lock the gear lever in 3rd/4th gear using the
3 mm drill
.
4. Engage gear.
Raise the vehicle. For additional information, refer to: (100-02 Jacking and Lifting)
Jacking (Description and Operation),
Lifting (Description and Operation).
Remove the gearshift cable cover.
NOTE:
Only adjust the selector cable.
Unlock the selector cable adjusting mechanism.
NOTE:
Ensure that the gearshift lever is in the 4th gear position and ensure that 4th gear is engaged in the transmission.
The selector cable is automatically adjusted to the correct length.
Lock the selector cable adjusting mechanism.
Install the gearshift cable cover.
Lower the vehicle.
Remove the
3 mm drill
.
Install the gearshift lever gaiter and trim panel in the centre console.
Mechanical Repairs
3 Powertrain
308 Manual Transmission-Transaxle, Clutch and Transfer Case / 308-00 Manual Transmission-Transaxle and Clutch - General Information
Diagnosis and Testing
General Procedures
Gearshift Cable Adjustment - Vehicles With: 5-Speed Manual Transmission (iB5)
Gearshift Cable Adjustment - Vehicles With: 5-Speed Manual Transmission (MTX-75) >
< Clutch System Bleeding