Removal and Installation Removal | -
NOTE:Removal steps in this procedure may contain installation details. Remove the transmission. Refer to: Transaxle - 2.5L Duratec-ST (VI5) (308-03D Manual Transmission/Transaxle - Vehicles With: 6-Speed Manual Transmission (M66), Removal). | | -
WARNING:If brake fluid is spilt on the paintwork, the affected areas must be immediately washed down with cold water. Torque: 11 Nm | Installation | -
To assemble, reverse the disassembly procedure. | | -
Install the transmission. Refer to: Transaxle - 2.5L Duratec-ST (VI5) (308-03D Manual Transmission/Transaxle - Vehicles With: 6-Speed Manual Transmission (M66), Installation). | | -
Bleed the clutch system. Refer to: Kupplungssystem entlüften (308-00, General Procedures). | | |