Removal and Installation Special Tool(s) | Disconnect Tool, Spring Lock Coupling 3/4" (white) 412-040 | | -
Remove the right-hand headlamp assembly. For additional information, refer to: Scheinwerfereinheit (417-01 Außenbeleuchtung, Removal and Installation). | | -
Evacuate the air conditioning (A/C) system. For additional information, refer to: Klimaanlage entleeren, evakuieren und befüllen (412-00 Innenraumklimatisierung - Allgemeine Informationen, General Procedures). | 3. Remove the components in the order indicated in the following illustration(s) and table(s). CAUTION:Close off the refrigerant lines and the dehydrator to prevent contamination. 1 - Nut, dehydrator refrigerant line to A/C compressor 2 - Dehydrator refrigerant line to A/C compressor 3 - Seal, dehydrator refrigerant line to A/C compressor 4 - Retaining clip, dehydrator refrigerant line to evaporator 6 - Seals, dehydrator refrigerant line to evaporator 4. To install, reverse the removal procedure. Removal Details Item 5 : Dehydrator refrigerant line to evaporator | -
Disconnect the refrigerant line from the dehydrator using the special tool. | Item 7 : Upper nut, dehydrator | -
Raise and support the vehicle. For additional information, refer to: Anheben mit Hebebühne (100-02, Description and Operation). | | -
Remove the right-hand wheelhouse cover (shown with wheel removed for clarity). | |