ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Generic Electronic Module (GEM) > < Generic Electronic Module (GEM)

Focus 2004.75 (07.2004-)

Multifunction Electronic Modules - Lighting Control Module (LCM) Focus 2004.75 (07/2004-)
Removal and Installation

1. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Bolt, lower dashboard cover
2
-
Lower dashboard cover
3
-
Data link connector (DLC)
See Removal Detail
NOTE:
NOTE:The LCM is mounted on the rear side of the dashboard, above the dashboard crossmember.

 
Item
Part Number
Description
4
-
LCM connector
5
-
LCM clips
6
-
LCM

2. To install, reverse the removal procedure.

NOTE:
NOTE:Following replacement of the LCM, configure the headlamp leveling system using WDS.
NOTE:
NOTE:Following installation of the LCM, calibrate the headlamp leveling system using WDS.
  1. NOTE:
    NOTE:Only vehicles with xenon headlamps
    Align the headlamps.
    For additional information, refer to: Headlamp Adjustment (417-01 Exterior Lighting, General Procedures).
  1. NOTE:
    NOTE:Only vehicles with dynamic cornering headlamps
    Perform an operating check on the dynamic cornering headlamps.

Removal Details

Item 3 : Data link connector (DLC)
  1. Detach the DLC from the lower dashboard cover.

Generic Electronic Module (GEM) > < Generic Electronic Module (GEM)