| Removal and Installation | | -
Disconnect the battery ground cable.
For additional information, refer to: Battery Disconnect (414-01 Battery, Mounting and Cables, General Procedures).
| | | -
Remove the A-pillar trim panels.
For additional information, refer to: A-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
| | | -
Disconnect the rear window washer tube. | | | -
Remove the overhead console.
For additional information, refer to: Overhead Console (501-12 Instrument Panel and Console, Removal and Installation).
| | | -
Remove the C-pillar trim panels.
For additional information, refer to: C-Pillar Trim Panel - 5-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).
| | | -
Remove the D-pillar trim panels.
For additional information, refer to: D-Pillar Trim Panel - 5-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).
| | | -
Disconnect the rear window washer tube. | | | -
Remove the instrument panel passenger side lower trim panel. | | | -
Lower the central junction box (CJB). | | | -
Open the glove compartment lid. | | | -
Remove the navigation system digital versatile disc (DVD) unit access cover (if equipped). | 12. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Glove compartment retaining screw covers 2 - Glove compartment retaining screws 3 - Glove compartment lid striker retaining screws 5 - Moving pictures experts group audio layer 3 (MP3) auxiliary connector electrical connector See Removal Detail 6 - Passenger airbag deactivation switch electrical connector 7 - Glove compartment housing 8 - Roof wiring harness to CJB electrical connector 9 - Roof wiring harness electrical connector 10 - Roof wiring harness to A-pillar retaining clips 12 - Roof wiring harness retaining clips 16 - B-pillar trim panel retaining screw trim covers 17 - B-pillar trim panel retaining screws 20 - Headliner retaining clips 31 - Sunvisor illumination lamp electrical connectors 33 - Rear interior lamp electrical connector 13. To install, reverse the removal procedure. | | -
Vehicles with global closing, initialize the door window motors.
For additional information, refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).
| Removal Details Item 4 : Glove compartment cooling hose | | -
Detach the glove compartment cooling hose from the glove compartment cooling vent. | Item 5 : Moving pictures experts group audio layer 3 (MP3) auxiliary connector electrical connector CAUTION:Do not place excessive strain on the electrical wiring harness when detaching the glove compartment. | | -
Reposition the glove compartment and disconnect the MP3 auxiliary connector electrical connector. | Item 11 : Noise, vibration and harshness (NVH) material | | -
Detach the NVH material from the upper A-pillar area to gain access to the roof wiring harness retaining clip. | Item 13 : Roof wiring harness | | -
Attach a draw cord to the roof wiring harness and CJB electrical connector. Feed the wiring harness through the NVH material to above the instrument panel A-pillar area. | Item 14 : Front door opening weatherstrips | | -
Detach the front door opening weatherstrip from the front door upper opening area. | Item 15 : Rear door opening weatherstrips | | -
Detach the rear door opening weatherstrip from the rear door upper opening area. | Item 18 : B-pillar trim panels | | -
Detach the B-pillar trim panels and position them to one side. | Item 19 : Rear passenger assist handles | | -
Lever open the rear passenger assist handle screw covers. | | | -
Remove the rear passenger assist handle retaining screws. | Item 21 : Glasses holder | | -
Lever open the glasses holder retaining screw covers. | | | -
Remove the glasses holder retaining screws. | Item 22 : Front passenger assist handle | | -
Lever open the front passenger assist handle retaining screw covers. | | | -
Remove the front passenger assist handle retaining screws. | Item 24 : Sun visor retaining clips | | -
Lever open the sun visor retaining clips retaining screw cover. | | | -
Remove the sun visor retaining clips retaining screw. | Item 25 : Roof wiring harness ground connection retaining bolt | | -
Detach the roof wiring harness and windscreen ground electrical connectors. | Item 26 : Sliding roof opening panel motor electrical connector | | -
Disconnect the sliding roof opening panel motor electrical connector. | Item 27 : Auto-dimming interior mirror trim covers | | -
Remove the auto-dimming interior mirror and rain sensor trim covers. - Release the locking clips.
- Slide the rain sensor trim cover off the auto-dimming interior mirror trim cover.
| Item 28 : Auto-dimming interior mirror and rain sensor electrical connectors | | -
Disconnect the auto-dimming interior mirror and rain sensor electrical connectors. | Item 30 : Headliner trim panel | | -
Tilt the front seats forward. | | | -
With the aid of another technician, remove the headliner through the liftgate opening. | Item 32 : Radio frequency (RF) receiver NOTE:Make a note of the position of the RF receiver to make sure that it is installed in exactly the same position as when removed. | | -
Using a suitable knife, detach the RF receiver from the headliner. | Item 34 : Roof wiring harness CAUTION:Take care not to damage the insulation of the roof wiring harness. CAUTION:The roof wiring harness must be cut off of the headliner and not pulled or ripped. Failure to follow this instruction could result in the incorrect function of electrical components. NOTE:Make a note of the position of the roof wiring harness to make sure that it is installed in exactly the same position as when removed. | | -
Using a suitable knife, remove the roof wiring harness from the headliner. | Item 35 : Sunvisor illumination lamps | | -
Release the sunvisor illumination lamp retaining clips. | Item 36 : Rear interior lamp | | -
Lever out the rear interior lamp. | Item 37 : Rear window washer tube CAUTION:Take care not to damage the rear window washer tube. Failure to follow this instruction could result in damage to the headliner. NOTE:Make a note of the position of the rear window washer tube to make sure that it is installed in exactly the same position as when removed. | | -
Using a suitable knife, remove the rear window washer tube from the headliner. | Installation Details Item 37 : Rear window washer tube CAUTION:The rear window washer tube must be installed in the same position as when removed. | | -
Using a suitable adhesive, bond the rear window washer tube to the headliner. | Item 34 : Roof wiring harness CAUTION:The roof wiring harness must be installed in the same position as when removed. | | -
Using a suitable adhesive, bond the roof wiring harness to the headliner. | Item 29 : Sliding roof opening panel trim | | -
With the aid of another technician, install the headliner. | Item 18 : B-pillar trim panels NOTE:Make sure the B-pillar safety belt height adjustment lever is aligned with the safety belt height adjustment mechanism. Item 13 : Roof wiring harness | | -
Using the draw cord, feed the roof wiring harness through the NVH material. | Item 11 : Noise, vibration and harshness (NVH) material | | -
Reposition the NVH material. | | 
