Removal and Installation WARNING:To avoid accidental deployment, the air bag control module backup power supply must be depleted. Wait at least one minute after disconnecting the battery ground cable(s) before commencing any repair or adjustment to the supplemental restraint system (SRS), or any component(s) adjacent to the SRS sensors. Failure to follow these instructions may result in personal injury. WARNING:Note the position of the wiring harnesses, to aid installation. An incorrectly routed wiring harness could become damaged when the seat is moved. Failure to follow this instruction may result in personal injury. 2. Remove the components in the order indicated in the following illustration(s) and table(s). All vehicles | -
To install, reverse the removal procedure. | Vehicles with front and rear power windows Installation Details Item 2 : Front seat retaining bolts | -
Install the front seat retaining bolts in the following sequence. - Rear inner retaining bolt.
- Rear outer retaining bolt.
- Front outer retaining bolt.
- Front inner retaining bolt.
| |