Seating - Front Seat Cushion Cover—2.5L Duratec-ST (VI5)
Focus 2004.75 (07/2004-)
Removal and Installation
Removal
All vehicles
CAUTION:Take extra care not to damage the wiring harnesses.
NOTE:Removal steps in this procedure may contain installation details.
3-door
Torque: 23 Nm
5-door
Torque: 23 Nm
All vehicles
CAUTION:Equal pressure must be applied to both surfaces of the hook and loop tape.
Remove the front passenger seat safety belt minder sensor (if equipped).
Installation
WARNING:Make sure that the safety belt minder sensor (if equipped) is correctly located with the seat cushion cover and the seat cushion heater mat (if equipped).
WARNING:Make sure that the seat cushion heater mat (if equipped) is correctly located with the seat cushion cover hook and loop tape.
