| Description and Operation Fixed Glass Fixed window glass is directly glazed to the window opening flange by means of a polyurethane (PU) adhesive bead. In addition to fixing the glass to the opening flange, the adhesive bead also forms a water tight seal around the inner edge of the glass. All vehicles have a heated rear window, a heated windshield is available as an option. Moving Glass - 3-Door, 4-Door, 5-Door and Wagon The front power windows have a one-touch down and a one-touch up function, combined with anti-trap protection, which is active whenever the window is closing. The anti-trap function will automatically deactivate if operated more than twice consecutively. The anti-trap function will reset automatically when the window is closed, after 10 seconds, or if the ignition is switched OFF then ON. Front power windows are installed as standard. Global closing of the front power windows is standard. Global closing on the front power windows can only be operated by using the remote key. Rear power windows do not have anti-trap functionality and are not part of global closing. Vehicles equipped with front and rear power windows require an initialization process to be carried out on each window motor. The initialization process is carried out before the vehicle leaves the production plant. However the initialization process will need to be carried out again whenever the power supply has been disconnected. The multiple switch on the driver door incorporates a safety switch which, when operated, prevents the rear power windows from being opened by the rear power window switches. However, the rear power windows can still be operated from the driver switch. Moving Glass - Convertible The front power windows have a one-touch down and a one-touch up function, combined with anti-trap protection, which is active whenever the window is closing. The anti-trap function will automatically deactivate if operated more than twice consecutively. The anti-trap function will reset automatically when the window is closed, after 10 seconds, or if the ignition is switched OFF then ON. Front and rear quarter power windows are installed as standard. Global closing of the front power windows is standard. Global closing on the front power windows can only be operated by using the remote key. Rear quarter power windows do not have anti-trap functionality and are not part of global closing. Vehicles require an initialization process to be carried out on each window motor. The initialization process is carried out before the vehicle leaves the production plant. However the initialization process will need to be carried out again whenever the power supply has been disconnected. The multiple switch on the driver door incorporates a safety switch which, when operated, prevents the rear quarter power windows from being opened by the rear quarter power window switches. However, the rear quarter power windows can still be operated from the driver switch. When the convertible roof is opened, the front and rear quarter power windows have a drop movement. When the convertible roof is closed, the front and rear quarter power windows move upwards to a fully closed position after the convertible roof has locked. | 
