| Removal and Installation Removal | | -
Remove the headliner.
For additional information, refer to: Headliner - 3-Door, Vehicles With: Sliding Roof Opening Panel (501-05 Interior Trim and Ornamentation, Removal and Installation) /
Headliner - 5-Door, Vehicles With: Sliding Roof Opening Panel (501-05 Interior Trim and Ornamentation, Removal and Installation) /
Headliner - Wagon, Vehicles With: Sliding Roof Opening Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
| | | -
Detach the roof opening panel front drain hose from the roof opening panel. | | | -
Detach the driver side footwell noise, vibration and harshness (NVH) insulation material from the A-pillar to gain access to the A-pillar access hole. | | | -
Remove the NVH insulation material from the A-pillar access hole (part of instrument panel removed for clarity). | | | -
Detach the roof opening panel front drain hose and drain hose valve from the A-pillar and position them in the A-pillar access hole (part of the instrument panel removed for clarity). | | | -
NOTE: Do not remove the roof opening panel front drain hose at this stage. NOTE:The new and the original roof opening panel drain hoses must be connected before the original roof opening panel front drain hose is removed from the A-pillar, to aid installation. Remove the drain hose valve (part of the instrument panel removed for clarity). | Installation | | -
NOTE:Apply a suitable lubricant to the new roof opening panel front drain hose, to aid installation. Using suitable tape, attach the new roof opening panel front drain hose to the original roof opening panel front drain hose at the roof opening panel. | | | -
NOTE:Make sure that a minimum of 200 mm of the new roof opening panel front drain hose remains at the roof opening panel. With the aid of another technician, detach the original roof opening panel front drain hose from the A-pillar (part of the instrument panel removed for clarity). - Pull the drain hose into the driver footwell through the A-pillar access hole.
| | | -
Remove the original roof opening panel front drain hose (part of the instrument panel removed for clarity). | | | -
Attach the drain hose valve to the roof opening panel front drain hose (part of the instrument panel removed for clarity). | | | -
Install the roof opening panel front drain hose and drain hose valve (part of the instrument panel removed for clarity). | | | -
Install the NVH insulation material to the A-pillar access hole (part of the instrument panel removed for clarity). | | | -
Attach the driver side footwell NVH insulation material to the A-pillar. | | | -
Attach the roof opening panel front drain hose to the roof opening panel. | | | -
Install the headliner.
For additional information, refer to: Headliner - 3-Door, Vehicles With: Sliding Roof Opening Panel (501-05 Interior Trim and Ornamentation, Removal and Installation) /
Headliner - 5-Door, Vehicles With: Sliding Roof Opening Panel (501-05 Interior Trim and Ornamentation, Removal and Installation) /
Headliner - Wagon, Vehicles With: Sliding Roof Opening Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
| | |
