Wiring diagrams Introduction – sheet 7
Introduction – sheet 7
Wiring diagram 3-7 · 2007 Focus
View full size Fit to page
Introduction E6Yenz01 3-7 2007 Focus 6/2006 Function Codes Basic color 1 NumberDescription WHAudio signal positive 2GYAudio signal negative 3BNAudio signal reference (return/shield) 4GYData link, bus positive 5BUData link, bus negative 6NOData link, bus shield 7YEVoltage D.C. supplied at all times (sensor) 8WHSensor signal 9BNSensor signal return (reference/ground) 10GYSignal 2 (Y–direction, reverse, downward) 14VTVoltage supplied in Start and Run (overload protected) 15GNVoltage, ignition switch in Start or Run (not overload protected) 20PKVoltage, hot in run only 29OGVoltage supplied at all times (overload protected) 30RDVoltage supplied at all times (not overload protected) 31BKGround 32WHSwitched between: Battery voltage, Ground or Open 33YESwitched between: Battery voltage, Ground or Open 34BUSwitched between: Battery voltage, Ground or Open 35VTSwitched between: Battery voltage, Ground or Open 48NODrain wire 96GNTrailer: Right Turn and Stop if Independent Stop not provided 97RDTrailer: Independent Stoplamp 98BUElectric trailer brakes 99WHTrailer ground (including for Aftermarket builder) 49BUPulsed power feed (overload protected) 50GYVoltage, ignition switch in Start (not overload protected) 59 GY AC Power 63WHVariable D.C. voltage (overload protected) 64BUVariable D.C. voltage (not overload protected) 74BUVoltage in Run or Accessory (overload protected) 75 YE Voltage: Ignition switch in Accessory or Run 86OGTrailer battery charge 87BNTrailer: Tail, License, Side, Clearance and I.D. 88YETrailer: Left Turn and Stop if Independent Stop not provided 89OGVoltage supplied at all times (overload protected electronic module) 90RDVoltage supplied at all times (not overload protected electronic module) 91BKGround 94VTVoltage, ignition switch in Start or Run (overload protected electronic module) 95GNVoltage, ignition switch in Start or Run (not overload protected electronic module)
20 Electrical
