ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Brake Disc - 2.0L Duratec-RS (Zetec) > < Brake Caliper - 2.0L Duratec-RS (Zetec)

Focus RS 2003 (09.2002-)

Rear Disc Brake - Brake Pads—2.0L Duratec-RS (Zetec) Focus RS 2003 (09/2002-)
Removal and Installation

Special Tool(s)

Retractor, Rear Caliper Piston Setting.

206-012 (12-006)
Materials
Name
Specification
Super DOT 4 Brake Fluid
ESD-M6C27-A 

Removal

CAUTION:
CAUTION:If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.
  1. Remove the wheel and tire. For additional information, refer to Section  204-04 Wheels and Tires.

  1. Detach the parking brake cable from the brake caliper.
    1. Pull back the parking brake lever.
    1. Detach the cable from the parking brake lever.
    1. Remove the retaining clip.
    1. Detach the cable from the brake caliper.

  1. CAUTION:
    CAUTION:Suspend the brake caliper to prevent load being placed on the brake hose.
    Detach the brake caliper from the anchor plate.

  1. Remove the brake pads.

  1. CAUTION:
    CAUTION:When the brake caliper pistons are retracted into the piston housing, brake fluid will be displaced into the brake fluid reservoir.
    Using the special tool, fully retract the brake caliper pistons.

Installation

  1. To install, reverse the removal procedure.
  1. Depress the brake pedal, check the fluid level in the brake fluid reservoir and top up if necessary with brake fluid.

Brake Disc - 2.0L Duratec-RS (Zetec) > < Brake Caliper - 2.0L Duratec-RS (Zetec)