Ford Workshop Service and Repair Manuals

Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

Detach the bumper lower cover from the left-hand fender and position it to one side.

Detach the bumper lower cover from the right-hand fender and position it to one side.

Lower the vehicle.

Place the vehicle on a level surface.

Make sure that the tires are inflated to the correct pressure and that the vehicle is not abnormally laden.

Switch on the front fog lamps.

Set the measuring screen of the beam setting equipment to the correct front fog lamp adjustment setting.

Adjust the front fog lamps.

Adjust the front fog lamps so that the boundary line touches the horizontal line.

Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

Attach the bumper lower cover to the left-hand fender.

Attach the bumper lower cover to the right-hand fender.

Lower the vehicle.