ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

501-16 Wipers and Washers|Specifications > < Rear Window Wiper Motor
Wipers and Washers - Windshield Washer Pump and Reservoir Focus RS 2003 (09/2002-)
Removal and Installation

Removal

  1. Remove the windshield washer reservoir filler neck.
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Remove the right-hand fender splash shield (wheel shown removed for clarity).

  1. Remove the washer reservoir.
    • Disconnect the electrical connectors.
    • Pull off the hoses.

  1. Remove the windshield washer pump with rubber gasket (shown with reservoir installed).
    1. Disconnect the electrical connector.
    1. Disconnect the hoses.
    1. Lift out the pump.

Installation

  1. NOTE:
    NOTE:When installing the windshield washer reservoir, the filler neck must be inserted using Vaseline.
    To install, reverse the removal procedure.

501-16 Wipers and Washers|Specifications > < Rear Window Wiper Motor