Freestar V6-4.2L VIN 2 (2004)
^
Engine not running.
^
Vehicle on level surface.
7.
Select Brake Booster/Steering Wheel Angle Calibration and follow on-screen prompts.
Steering Angle Sensor Calibration requirements
^
Engine running.
^
Turn steering lock to lock.
EAS Booster Calibration requirements
^
Vehicle in park.
^
Engine running.
^
Brake not applied.
MODULE CALIBRATION USING THE NGS
1.
Use NGS green service card version 12.4 or greater.
2.
Select new vehicle "2004 Freestar/Monterey".
3.
Main menu trigger on "Service Bay Functions".
4.
Trigger on "ABS".
5.
Trigger on "IVD Calibration".
6.
NGS message indicates "Prepare Vehicle For Test/Function", ensure that the following requirements are met:
^
Vehicle is on level surface.
^
Start the vehicle and let idle.
^
Steering wheel is centered.
a.
Push the trigger button.
7.
NGS will automatically go through calibration process steps 7a and 7b, Step 7c must be performed manually.
a.
Calibrates YAW/LAT Sensor Cluster.
b.
Proceeds to Booster Learn.
c.
Steering Wheel Angle Sensor, MANUALLY turn steering wheel full left and right (lock to lock).
NOTE
WHEN THE CALIBRATION PROCEDURE PASSES A MESSAGE WILL APPEAR INDICATING "VEHICLE CALIBRATION
COMPLETE".
8.
Press cancel to back out to main menu, turn vehicle off, restart vehicle.
9.
Use the NGS red diagnostic card and clear codes.
10.
Road test the vehicle to verify fix.
NOTE
IF NGS DISPLAYS A MESSAGE INDICATING: "DETERMINING ABS PROTOCOL- PLEASE WAIT" OR "FAILED BOOSTER
LEARN" DURING THE AUTOMATIC CALIBRATION PROCESS, OR NGS KEEPS CANCELING THE CALIBRATION PROCESS,
THIS MEANS THERE IS A SYSTEM FAULT/CODE PRESENT AND/OR THE ORIGINAL CONDITION HAS NOT BEEN RESOLVED.
