| Removal and Installation Removal All vehicles | | -
Remove the front door window glass.
For additional information, refer to: Front Door Window Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation).
| Vehicles with power windows | | -
Remove the front door window regulator motor.
For additional information, refer to: Front Door Window Regulator Motor (501-11 Glass, Frames and Mechanisms, Removal and Installation).
| Vehicles with manual windows | | -
Remove the window regulator handle. | All vehicles | | -
Disconnect the wiring harness at the A-pillar and push it into the door. | Vehicles with power mirrors | | -
Disconnect and detach the exterior mirror electrical connector from the door. | All vehicles | | -
Remove the front door latch retaining screws. | | | -
Remove the front door lock cylinder cover retaining screw and remove the front door lock cylinder cover. | | | -
Remove the exterior front door handle. | | | -
Remove the exterior front door handle gasket. | | | -
Remove the exterior front door handle reinforcement plate retaining nut. | | | -
Push the front door lock cylinder and exterior front door handle reinforcement plate into the door by releasing the clips. | | | -
Remove the front door inner panel retaining bolts (power window shown). | | | -
NOTE:When lifting the inner panel away from the lower edge of the door panel, make sure the window regulator is clear of the door panel. Remove the front door inner panel (power window shown). - Rotate the front door inner panel counterclockwise and push it forwards.
- Lift the front door inner panel away from the lower edge of the door panel.
- Pull the front door inner panel downwards to release it.
| | | -
Rotate the front door inner panel to access the window regulator. | | | -
Remove the front door window regulator. - Remove the retaining screws.
- Release the retaining clips.
| Installation | | -
To install, reverse the removal procedure. | |
