Fusion FWD L4-2.3L VIN Z (2007)
-
If the air bag cover has separated or the air bag material has been exposed, install a new side air bag module.Do not attempt to repair the air
bag module. Failure to do so may result in personal injury in the event of an air bag deployment.
-
Inspect the mounting surfaces of the side air bag module for any foreign objects before installing the side air bag module. If any foreign objects
are found, remove them. Failure to do so may result in personal injury, in the event of an air bag deployment.
Connect the side air bag module electrical connector and then slide and engage the side air bag electrical connector locking clip.
18. Install the side air bag module to the mounting bracket on the backrest frame.
-
Position the side air bag module locator hook in the side air bag bracket the seat back frame.
19. Align the bolt hole and install the side air bag bolt.
-
Tighten to 10 Nm (89 lb-in).
20. Install the side air bag bolt cover.
All seats
21. Install the front seat backrest.
22. Install the front seat and repower the SRS. If a passenger seat has been serviced, do not prove out the SRS at this time.
Passenger seat
23. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test and prove out the SRS.
Seat Backrest - Front, With Fold Flat
SEAT BACKREST - FRONT, WITH FOLD FLAT
Special Tool(s)
Special Tool(s)